professional factory for Solvent Fume Extractor - ACPL-VCP DC Diffusion pump silicone oil – Jiongcheng
Short Description:
professional factory for Solvent Fume Extractor - ACPL-VCP DC Diffusion pump silicone oil – Jiongcheng Detail:
Product Introduction
ACPL-VCP DC is a single-component silicone oil specially designed for use in ultra-high vacuum diffusion pumps. It has high thermal oxidation stability, small viscosity-temperature coefficient, narrow boiling point range, and steep vapor pressure curve (a little temperature change, a large vapor pressure change), low steam pressure at room temperature, low freezing point, coupled with chemical inertness, non-toxic, odorless, and non-corrosive. Therefore, it can be used for a long time under 25CTC, in a vacuum environment, allowing higher temperature use.
ACPL-VCP DC product performance and advantages
● Reduce the running time.
● Single-component silicone oil takes much shorter time to reach the maximum vacuum degree than with multi-component silicone oil, and it is quickly evacuated.
● Minimal reflux, the vapor pressure of the diffusion pump silicone oil is extremely low, so that it is not necessary for many applications or existing traps to refrigerate.
● Longer service life.
● The thermal and chemical stability of silicone oil allows long-term operation without deterioration and pollution.
● The cleaning system needs less maintenance.
● Fast cycle, reducing downtime, and less need to change oil.
Purpose
ACPL-VCP DC diffusion pump silicone oil can be used as ultra-high vacuum diffusion pump oil in electronics, metallurgy, instrumentation and other industries.
It can be used as high temperature heat carrier and transfer fluid in the instrument.
It can be used as the working fluid of the ultra-high diffusion pump required by the electronics, aerospace, nuclear industry and other industries.
Project name |
ACPL-VCP DC704 |
ACPL-VCP DC705 |
Test metod |
Kinematic viscosity (40℃), mm2/s |
38-42 |
165-185 |
GB/T265 |
Refractive index 25℃ |
1.550-1.560 |
1.5765-1.5787 |
GB/T614 |
Specific gravity d25 25 |
1.060-1.070 |
1.090-1.100 |
GB/T1884 |
Flash point (opening), ℃≥ |
210 |
243 |
GB/T3536 |
Density(25℃) g/cm3 |
1.060-1.070 |
1.060-1.070 |
|
Saturated vapor pressure, Kpa < |
5.0×10-9 |
5.0×10-9 |
SH/T0293 |
Ultimate vacuum degree, (Kpa), 4 |
1.0×10-8 |
1.0×10-8 |
SH/T0294 |
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our enterprise with the long-term to build with each other with consumers for mutual reciprocity and mutual advantage for professional factory for Solvent Fume Extractor - ACPL-VCP DC Diffusion pump silicone oil – Jiongcheng, The product will supply to all over the world, such as: Swaziland, panama, Poland, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part solutions. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
By Mignon from Argentina - 2018.10.01 14:14
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Eden from Tajikistan - 2018.06.05 13:10