Rapid Delivery for 3d Printer Fume Extractor - ACPL-T622 Centrifugal Air Compressors Fluid – Jiongcheng
Short Description:
Rapid Delivery for 3d Printer Fume Extractor - ACPL-T622 Centrifugal Air Compressors Fluid – Jiongcheng Detail:
Compressor Lubricant
PAG(Polyether base oil)+POE(Polyol)+High performance compound additive
Product Introduction
Fully synthetic centrifugal oil is a high-quality clean centrifugal compressor lubricating oil, specially designed to provide reliable lubrication, sealing and cooling for centrifugal compressors. This product uses an additive formula containing high-quality detergents, which has good oxidation stability and high temperature stability; this product has very little carbon deposits and sludge generation, which can reduce maintenance costs, provide good protection and excellent performance, and standard Under working conditions, the recommended oil change interval is as long as 30,000 hours.
ACPL-C612 Product Performance And Feature
● Specially designed for centrifugal compressors to provide reliable lubrication, sealing and cooling
● Good oxidation stability and high temperature stability
● Few carbon and sludge formation
● Extremely low volatility reduces maintenance and saves consuming costs
● Service life: 30000h
● Applicable temperature: 85℃-110℃
Purpose
ACPL C612 is maunly for centrifugal compressors,which is suitable for all brands.
Under 110 degree temperature, it can be used as long as 30000H.
| PROJECT NAME | UNIT | SPECIFICATIONS | MEASURED DATA | TEST METHOD |
| APPEARANCE | - | Colorless to pale yellow | pale yellow | Visual |
| VISCOSITY | 32 | |||
| DENSITY | 25oC, kg/l | 0.94-0.99 | 0.97 | |
| KINEMATIC VISCOSITY @40℃ | mm2/s | 28.2-35.8 | 28 | ASTM D445 |
| KINEMATIC VISCOSITY @100℃ | mm2/s | measured data | 5.6 | ASTM D445 |
| VISCOSITY INDEX | ||||
| FLASH POINT | ℃ | > 200 | 230 | ASTM D92 |
| POUR POINT | ℃ | < -18 | -30 | ASTM D97 |
| ANTI FOAMING PROPERTY | ml/ml | < 50/0 | 0/0, 0/0, 0/0 | ASTM D892 |
| TOTAL ACID NUMBER | mgKOH/g < 0.3 | 0.2 | ||
| DEMULSIBILITY (40-37-3)@54℃： | min | < 30 | 12 | ASTM D1401 |
| CORROSION TEST | pass | |||
Product detail pictures:
Related Product Guide:
To continually enhance the management technique by virtue of your rule of "sincerely, great faith and high-quality are the base of company development", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Rapid Delivery for 3d Printer Fume Extractor - ACPL-T622 Centrifugal Air Compressors Fluid – Jiongcheng, The product will supply to all over the world, such as: Doha, Roman, Uganda, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Cara from Luxembourg - 2017.05.21 12:31
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Cara from Egypt - 2018.04.25 16:46
