Well-designed Dust Treatment - Self-cleaning Air Filter Element – Jiongcheng
Short Description:
It is formulated with high-quality synthetic base oil and carefully selected high-performance additives. It has good oxidation stability and high and low temperature stability. There is very little carbon deposit and sludge formation, which can extend the life of the compressor and reduce the operating cost. The working time is 6000-8000 hours under standard working conditions, which is suitable for all screw type air compressors.
Well-designed Dust Treatment - Self-cleaning Air Filter Element – Jiongcheng Detail:
Description
Dust collector filter elements and self clean filter elements are made by JCTECH factory itself(Airpull). It is precisely design for wide filtration surface and big air flow rate with its self researched filtration material and structures. Diffferent caps are availabe for different operation patterns. All items are marked Replacement or Equivalent and are not affiliated with the original equipment manufacture, part numbers are for cross reference only. JCTECH filters are made from a premium blend of flame retardant cellulose and polyester media. This material is especially designed for back pulse operations, and offers enhanced stability and structural integrity. All cellulose blend filters are dimpled pleated. This pleat lock helps maintain pleat spacing during operation. This is an aftermarket replacement filter for dust collector models including Donaldson Torit Model Downflow II or DFT 2, AerTable (Round Access Cover), CX, Downdraft Bench 2000 and 3000, Uniwash / Polaris Intercept Dust Collectors, and many manufacturers if equipment that use the same size filter.
|
Number |
Design project |
Design Parameter |
|
1 |
Specification |
Ø320*1000 |
|
2 |
Fixed air volume |
1500N.m³/H/T |
|
3 |
Initial resistance |
≤150PaM |
|
4 |
Operation resistance |
150-650Pa |
|
5 |
End resistance |
≥850pa |
|
6 |
Filter accuracy |
2 Micorn |
|
7 |
Filter efficiency |
PM2.0≥99.99% |
|
8 |
Replacement cycle |
12-18 mouths |
|
9 |
Withstand the backflush pressure |
≤0.8MPa |
|
10 |
Monthly average highest humidity |
≤80% |
|
11 |
Working temperature |
-35℃~+65℃ |
|
12 |
Filter paper |
US HV Filter FA6316 |
|
13 |
Filter area |
27 ㎡ |
|
14 |
Folds |
280 |
|
15 |
Folds’height |
48mm |
|
16 |
Structure |
Rhombus Steel Mesh, Material Q195 Surface treatment: zincification |
|
17 |
Gluid |
Two-component polyurethane |
|
18 |
Gasket |
EPDM (Boom type), ≥80% Rebound rate Polyurethane (snap-in type)≥85% Rebound rate |
|
19 |
End cap material |
SECCN5/δ0.8（Boom type） Enhanced ABS/white (Snap type) |
Product detail pictures:
Related Product Guide:
With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for Well-designed Dust Treatment - Self-cleaning Air Filter Element – Jiongcheng, The product will supply to all over the world, such as: Latvia, Mumbai, Madras, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Emily from Curacao - 2018.09.29 13:24
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Raymond from Vancouver - 2017.08.15 12:36
