ACPL-316S Screw Air Compressor fluid
Short Description:
It is made from GTL natural gas extraction base oil and high-performance additives. It has good oxidation stability, very little carbon deposit and sludge formation, prolongs the life of the compressor, reduces operating costs, and the working time under standard operating conditions. is 5000-7000 hours, suitable for all screw type air compressors.
Compressor Lubricant
GTL (Natural Gas Extracted Base Oil) + High-Performance Compound Additive
Product Introduction
It is made from GTL natural gas extraction base oil and high-performance additives. It has good oxidation stability, very little carbon deposit and sludge formation, prolongs the life of the compressor, reduces operating costs, and the working time under standard operating conditions. is 5000-7000 hours, suitable for all screw type air compressors.
ACPL-316S Product Performance And Feature
● Good oxidation stability and high temperature stability
● Low carbon residual rate
● Excellent anticorrosion, wear resistant and water separability
● Service life: 5000-7000H, 7000H in standard working condition
● Applicable temperature: 85℃-95℃
● Oil change cycle: 4000H, ≤95℃
Purpose
ACPL 316S is GTL (Natural Gas Extracted Base Oil) + High-Performance Compound Additive. It is very effective and economically valued for high end compressor performance. It will take a 4000H running time before oil change under 95 degree temperature. It can be applied to many global brands ,such as Atlas Copco and most of the asian branded compressors.
| PROJECT NAME | UNIT | SPECIFICATIONS | MEASURED DATA | TEST METHOD |
| APPEARANCE | - | Colorless to pale yellow | pale yellow | Visual |
| VISCOSITY | 46 | |||
| DENSITY | 25oC,kg/l | 0.854 | ||
| KINEMATIC VISCOSITY @40℃ | mm2/s | 41.4-50.6 | 45.8 | ASTM D445 |
| KINEMATIC VISCOSITY @100℃ | mm2/s | measured data | 7.6 | ASTM D445 |
| VISCOSITY INDEX | 130 | |||
| FLASH POINT | ℃ | > 220 | 253 | ASTM D92 |
| POUR POINT | ℃ | < -21 | -36 | ASTM D97 |
| ANTI FOAMING PROPERTY | ml/ml | < 50/0 | 0/0, 0/0, 0/0 | ASTM D892 |
| TOTAL ACID NUMBER | mgKOH/g | 0.1 | ||
| DEMULSIBILITY (40-37-3)@54℃ | min | < 30 | 10 | ASTM D1401 |
| CORROSION TEST | pass | |||
| Rotating Oxygen and Nitrogen | min | 2100 | T0193 |
The oil change cycle referred to the guideline based on actual experience. They rely on the technical conditions of the purpose and application of the air compressors.
